Researchers from theFraunhofer-GesellschaftandRMIT Universityhave demonstrated a method to control the grain structure of metal components during additive manufacturing (AM). The work was carried out within theUltraGRAINresearch project, which focused on laser-based directed energy deposition (DED-LB). The project concluded on February 25, 2026, following a final partner meeting in Dresden.
The consortium included theFraunhofer Institute for Material and Beam Technology IWS, theFraunhofer Institute for Additive Manufacturing Technologies IAPT, and RMIT University in Melbourne. Supported by theFraunhofer ICONprogram and Australian partners, the project aimed to develop a scalable approach for tailoring microstructures directly during the build process.
Controlling microstructure is a longstanding challenge in metal AM. Grain structures tend to form naturally during solidification and are difficult to modify locally. These structures influence several mechanical properties such as fatigue strength, service life, and load-bearing performance.
UltraGRAIN explored methods to influence grain formation during production. Early experiments used ultrasound to affect solidification behavior. Researchers later shifted to pulsed-laser excitation of the melt pool, a non-contact technique that can operate with complex geometries and industrial equipment.
The pulsed laser approach directly excites the melt pool during deposition. According to the research team, the method can be integrated into existing laser-based DED systems and offers greater scalability than ultrasonic techniques.
Refining the grain structure of printed metal parts
Testing on demonstrator components showed that the approach can significantly refine the grain structure of printed metal parts. In some cases, researchers reported a reduction in grain size of up to 75 percent. This level of control allows engineers to create locally optimized zones within a component during production.
“UltraGRAIN shows how Fraunhofer IWS develops new manufacturing technologies consistently from concept to industrial application,” said Professor Christoph Leyens, Director of Fraunhofer IWS. “The results offer significant scientific insight and provide an excellent foundation for future industrial transfer.”
A key aspect of the project was collaboration across process development, digital design, and materials modeling. Fraunhofer IWS integrated pulsed laser melt-pool excitation into DED systems and validated the technology under industry-relevant conditions. Fraunhofer IAPT developed segmentation, path planning, and parameter assignment methods for components with locally varying microstructures.
RMIT University contributed multiscale modeling and simulation-based process design. According to Dr. Andrey Molotnikov, Professor and Director of the Centre for Additive Manufacturing at RMIT University, “Active collaboration among the project partners was a key highlight of the ICON project,” he said.
Source: 3D Printing Industry
